Audiodg.exe Windows Audio Device Graph Isolation

Windows Audio Device Graph Isolation

Windows can have several issues or problems that are quite annoying for the users. One of those problems is the audiodg.exe windows audio device graph isolation. This issue can happen when you are running the task manager on your Windows PC or computer. Usually, it will give you a notification due to this isolation issue.

Maybe, some of you will have a question in your mind; is it a virus? What is it? It is normal because this problem sometimes might even consume a lot of CPU memory or even too much CPU memory that is consumed. That is why; it is better to fix this problem. The Windows Audio Device Graph Isolation process is the base of a Windows audio engine. It means that it will control all the Windows sound enhancement process.

For your information, the Windows Audio Device Graph Isolation is separated from the standard Windows audio service that you have ever met. It can be seen from the services that allow the developers of sound drivers to enter or insert their audio effects without even touching the Windows Audio Service itself.

Because caused when the task manager is running, some users face this audiodg.exe windows audio device graph isolation problem due to the higher use of the system resource where it consumes too much of your CPU. This process is related more to the Windows Module and it is maybe not a virus. However, in the other case, it can be a virus as well where it can hack such processes sometimes.

That is why; maybe it is better to check whether it is a virus or not. To ensure that it is not a virus, you have to check the file location process. Here are the complete steps to check it:

  1. a) First of all, right-click on the option of “Windows Audio device graph isolation” that is located in the task manager and then choose the Open file location part there.
  2. b) Usually, the file will be located in the “C:\Windows\System32” with the default name as “Windows audio device graph isolation”. This process can be shown as the AudioDG.exe as well.
  3. c) If that file is stored in that default location, you can ensure that it is not a virus.

After you knew that it is not a virus, maybe some of you will have a question; if it is not a virus, then why is it consuming the CPU hard drive? In fact, the Windows Audio Device Graph Isolation can stop running or working completely. It can be caused by the poorly written audio enhancement drivers. This whole process then can cause high memory usage on your computer. After that, there can be no sound that can be heard and it can crash and then it will give an alert about it.

So, how to fix the audiodg.exe windows audio device graph isolation problem? You don’t need to be worried because we will share the solutions below.

 

METHOD 1: Re-Install the Audio Driver

The first method that you can try is by uninstalling the Audio Driver and then installs it again. Some users reported that this way is quite effective to solve this issue. To do this first solution, below are the complete instructions to follow:

1)         First of all, you need to press the Win and R button together (Windows and Run key at the same time). This action will open the Run dialog box.

2)         After that, you have to type the “devmgmt.msc” (without the quotation mark) in the RUN box and then click the OK button there. This action will directly open the Device Manager. For the alternative, you can also open the Device Manager directly from the Windows Control Panel.

3)         Next, in the Device Manager Window, you need to expand the category of Sound, Video, and Game Controllers.

4)         Then, on the sound card device name, right click on it and then the context menu will pop up

5)         You need to confirm the un-installation process by giving a check mark on the box beside the option of Delete the Driver Software for this Device.

6)         Click the OK option and then start or run the process of un-installation.

7)         After this un-installation process is finished, you have to restart the computer or PC and see the changes for taking an effect.

If this first method is not working for solving the audiodg.exe windows audio device graph isolation problem, you can try the other solutions below.

 

METHOD 2: Disabling all the sound effects

The other solution is by disabling all the sound effects and now you can try this out.

1)         First of all, right-click on the speaker icon that is located in the Windows taskbar (you can see it in the bottom of your desktop screen). Then, choose the Playback Device.

2)         After that, a window will be displayed. Look under the Playback tab. You can click the SPEAKERS and then go to the “Properties”

3)         In the next windows, you have to click the Enhancement tabs and check the box that is located beside “Disable all sound effects” option.

4)         Click the OK button.

5)         If you don’t find the option in that box, you can go back to the sound dialog box and then choose the best sound options such as Microphone.

6)         After that, you need to disable the sound effects.

That’s it. You have to try this method.

 

METHOD 3: Re-installing Skype

Some users reported that they experienced the audiodg.exe windows audio device graph isolation problem when they use SKYPE. If you also had the same condition, maybe this way is perfect for you. You have to uninstall the Skype from your computer and then you can simply install it again. For this case, we highly recommend you to re-install the latest version of Skype that you can get from its official site.

The audiodg.exe windows audio device graph isolation issue can be annoying and make you feel uncomfortable. That is why; we recommend you to try the methods above to fix it.

Windows 10 Volume Slider is not Working

Windows 10 can have several different issues; one of those issues is the Windows 10 Volume slider is not working. If you have experienced it too, you don’t need to be worried because, in fact, sound problem is really common in every version of the Windows. Due to the use of Windows 10, some users said that they are unable for opening the control bar from the Windows 10 taskbar. In addition, you are not the only one who is experiencing this problem. That is why; today we have prepared several solutions to help you and everybody who is having this issue.

This problem means that you are not able to adjust the volume. Below are the solutions to fix the Windows 10 Volume Slider that is not working on your Windows 10.

Windows 10 Volume Slider is not Working

Installing the Sound Drivers

This first solution is perfect if there is a dysfunctional sound control and if you are unable to hear any sound from the computer. If it happens, maybe the sound driver is missing or maybe corrupted. That is why; you need to check that everything is okay. To do so, there are several instructions and steps that you can do:

  1. First of all, you have to right-click the speaker icon that is located in the taskbar. Then, you need to choose the Playback Devices.
  2. After that, double-click on that default playback device.
  3. Under the controller information, you need to choose the Properties.
  4. Then, you need to go to the CHANGE settings and go to the “Driver” tab
  5. There are some few options in the Driver Tab. For this case, you can try to update the sound driver first by choosing the “Update Driver”. If the sound driver is not available, you can search online for the right driver for the sound card, and install for it.
  6. The last step is restarting your computer.

After that, you can check whether the problem is already fixed or not. This solution is effective and working for some users and maybe it will be working for you too. However, we still have some other solutions that you can try below if this first method is not working for you.

 

Restart Your Audio Service

In addition, some users reported that the Windows 10 Volume Slider is not working problem can be fixed easily by just restarting the audio service. That is why; you can also do this second solution to fix the issue. Below are the ways to restart your audio service:

  1. First of all, you have to go to the Search and then type ‘services.msc” without the quotation mark. After that, go to the SERVICE option.
  2. Then, find the Windows Audio and right-click on it. Then, you have to choose the Properties option.
  3. Before going to the further action, please ensure that the Startup Type is set into the “Automatic Option”
  4. After that, click the STOP option and please wait until the process to stop.
  5. Now, it is the time to choose the START option again.
  6. Last, restart your computer and you need to check whether the issue is fixed or not.

This second solution is so easy to do and you can try it to solve the Windows 10 Volume Slider is not working. If this method is also not working for you, we still have the other methods below.

 

Performing the SFC Scan

Performing the SFC scan can be also the right weapon to solve the Volume Slider that is not working on your Windows 10. Why? Sometimes your files can be corrupted and it can affect the volume control and make it is not able to work properly. Just follow these steps to perform the SFC scan easily:

  1. You need to press the Windows Key together with the X button at the same time for opening the Win + X menu.
  2. After that, choose the Command Prompt (admin) from the list. If the command prompt is not available, you can use the PowerShell (admin) too as the other option.
  3. After the Command Prompt opens, you need to enter the SFC / Scannow and then press the ENTER button for running it.
  4. Now, the SFC scan will be started. This scan will need for about 10 – 15 minutes long and don’t interrupt it.

After the scanning process is completely done, usually the files will be repaired and the volume control is fixed. It means that you can adjust the volume again.

 

Run the Hardware and Device Troubleshooter

In addition, you can easily fix the Windows 10 Volume Slider is not working by running the Hardware and Device Troubleshooter. This step is also so simple to do. Here are the further steps that you need to do:

  1. You need to press the Windows key button and l button together for opening the setting app.
  2. After the setting app is opened, you need to navigate to the Update and Security option
  3. Then, choose the Troubleshoot from the menu on the left side.
  4. In the right panel, you have to choose the “Hardware and Devices” and then click the Run the Troubleshooter Button.
  5. The Troubleshooter will be started and you can check for problems.

Wait until the troubleshooter is done and after it is completely done, you need to check whether the issue has been fixed or not.

 

Re-install the Audio Driver

Sometimes, the Volume Slider cannot be working because of the drivers. What we mean here is that your driver can be corrupted and you have to re-install them. Below are the steps:

  1. Open the Device Manager by pressing Windows Key+X button together
  2. Choose the Device Manager
  3. Right-click on the problematic device and choose the “Uninstall Device” option
  4. Click the UNINSTALL button to remove it.

We are suggesting you uninstall the Speaker Audio device from the section of Audio Input and Output. After that, you can click the icon of Scan for Hardware Changes to restart the PC.

Destination Folder Access Denied Windows 10

After you upgrade your Windows from the Windows 7/8 to the Windows 10, some issues can happen. One of those issues is the Destination Folder Access denied Windows 10. Actually, this error can be also happened when they try to copy, delete, or move the file or a folder locally or from the shared resource. The error is usually stating “The destination folder access denied”.

Thank God because this problem can be solved with several solutions. Here are those solutions that you can try.

Destination Folder Access Denied Windows 10

Check the Administrator Rights

The first solution that you can try is by checking the administrator rights. To do this first solution, you just need to follow some simple steps below:

  1. If the condition is when you are the only person who is using the Windows 10 PC or laptop, and you knew that you are on the administrator account, you need to press and hold the Windows button and E button in your keyboard together.
  2. After that, right-click on the “C:” drive or the partition that you are having an issue with. Choose them from that menu of “Properties”
  3. Then, left-click on the SECURITY tab that is located in the upper side of the window.
  4. The next thing to do is left-click again on the ADMINISTRATORS option (computer name and administrators)
  5. First, you have to verify if you have a check mark for each of the entry and then it is on “allowed”.
  6. If you don’t have each entry on “allowed”, you need to left-click on the EDIT option and then change the entry to allow it.
  7. After that, left-click on the OK button after you have changed all the entries to the ‘allowed’ option.
  8. Left-click again on the OK button in the other window that you had opened.
  9. After that, reboot your Windows 10 PC.

After rebooting the PC, you need to see whether you have the same message that appears or not. If this first method is not effective to solve the Destination Folder Access denied Windows 10 problem, you still be able to try the other solutions.

 

Checking the Program Permissions

The second method is by checking the Program Permissions. Below is the further description and way about this method:

  1. First of all, right click on the “C:” drive or the partition where you are having this issue with. Choose from that menu the Properties option.
  2. Then, left-click on the SECURITY tab that is presented in the upper side of the window.
  3. After that, left-click again on the “advanced” button that is presented in the Window.
  4. You will have the Permission Tab there that is located on the upper side of the Window that you opened. Now, you need to open it.
  5. Choose the “administrator” option in the “Permissions” tab and then choose from the feature that is called the CHANGE PERMISSIONS.
  6. Then, you will have there the area of Basic Permissions. Verify that all of those options are checked.
  7. Usually, there is a drop-down menu that states “Applies to”. In that menu, you have to ensure that the feature of “This folder, subfolders, and files” is already selected.
  8. Left-click on the OK button
  9. Left-click on the OK button again in the other window
  10. Left-click on the APPLY button in the last window that appears

The last step is rebooting your Windows 10 PC or laptop and you have to verify that you can copy or paste the folders and files now. Some users reported that this method is quite effective for them to solve the related issue.

 

Using the Command Prompt to Take the Ownership

To solve the Destination Folder Access denied Windows 10 problem, you can use the CMD or command prompt to take the ownership of problematic files, driver, or folder. This is what we have for the third solution. Below are the instructions that you can do to take that ownership:

  1. You have to go to the START > Type the CMD > double-click on the first result for launching the Command Prompt.
  2. After that, type this “takeown /f “C:Music” without the quotation mark command to take the ownership of the whole files that are stored in the Music Folder.

That’s it. It is so simple and really easy as well. You can try it by yourself. However, if you don’t feel so confident enough, you can ask help from the other people who know about computer better.

 

Turning on the Network Discovery and File Sharing

If you get this Destination Folder Access denied Windows 10 issues by copying or moving a file to or from the network location, you need to ensure that the Network Discovery & File Sharing is enabled on the systems of Source or Destination.

To do so, you need to press the Windows Key and then type “Network and sharing center” in the search box type. After that, press the ENTER button to open it. In the window of the Network and Sharing Center, you need to click on the “Change Advanced Sharing Settings” that is located in the left panel there.

After that, click the arrow against the Home or Work. You need to ensure to turn on the network discovery and then turn on the file and printer sharing button. If it is not, you can select them and then choose the OK button. Just like the other solutions above, this method is also so easy to do and maybe it is the right solution for you to solve this issue or problem.

So, the solutions above are so easy and simple. We hope that you will try at least one of the solutions above to find the best one for you. Some users reported that they can fix the Destination Folder Access denied Windows 10 issue by using the methods above. It means that it is your turn to try it now and use the Windows 10 in a more comfortable way.

Windows Resource Protection could not Perform Windows 10

Usually, you can use the SFC or the System File Checker for scanning and restoring the corrupted Windows system files. This action is always done when some Windows functions do not work properly or when the Windows crashes. However, some Windows 10 users reported that when they do the “SFC /scannow” command, they got a message that states “Windows Resource Protection could not perform the requested operation”. Do you have the same issue too?

Windows Resource Protection could not Perform Windows 10

If it is so, there are some methods or solutions that you can try to fix this problem. We will share those solutions in this description. However, you may need to back up some data first as anticipation. It is because you may have a large amount of vital data that needs to be protected as time goes on, such as the music, pictures, videos, document, and many more again. Backing up your data before doing some actions to fix an issue is the good habit to get over unexpected data loss.

After backing up the important data that you have, now you can start to fix the Windows Resource Protection could not Perform Windows 10 issue. Below are the complete solutions.

 

Run the CHKDSK

The first method that you can apply is running the CHKDSK. If you had any errors on your drivers, usually the SFC will also fail. That is why; the CHKDSK is the perfect tool to check the integrity of your hard disk and it can help to fix some kinds of file system errors. Here are the instructions to run this tool:

  1. First of all, you need to type “cmd” in the search box from the START option. After that, right-click on the Command Prompt area to choose the Run as Administrator option.
  2. Then, click the YES option when prompted by the User Account Control
  3. Then, type CHKDSK /r in the command prompt windows and then press the ENTER button. When you are asked to schedule the checking disk, you can enter the Y.
  4. Then, you need to close the Command Prompt Window and restart the computer.

After that, it usually will start checking the disk and then fix the errors that are detected automatically. The next thing to do is running the “sfc / scannow” to see whether it is worked or not. For some users, this first method is effective. That is why; it can be so effective for you too. However, if this first solution is not working for you, you can try the other solutions below.

 

Running the SFC in Safe Mode

The next solution is by running the SFC in Safe Mode. Just like the first method above, this second solution is also so easy to do. Follow the steps below to apply this solution:

  1. First of all, you need to press the Windows Logo Key on your keyboard and the R button at the same time. This action will invoke the RUN box.
  2. Then, you have to type the “msconfig” and after that press the ENTER button
  3. Tick on the SAFE BOOT in the boot and after that click the OK button that is available there.
  4. Usually, there will be a system configuration that appears, you need to click RESTART when it is asked. After that, your Windows will then “boot” into the safe mode.
  5. The next step to do running the “sfc /scannow” to see if it works or not.

Just try this method to find out whether it is the right solution for you or not to solve the Windows Resource Protection could not Perform Windows 10 issue.

 

Modifying the Security Descriptors on the Winsxs Folder

If the solutions above are not working for you or if the error message still pops out, it can mean the problem has nothing to do with the disk errors. That is why; you can continue to check the other possibilities. This can be the SFC utility cannot access the Winsxs folder because of the issues due to the Folder’s security descriptors.

Here are the instructions for doing this third solution that you can follow:

  1. The first action to do is opening the command prompt.
  2. In the command prompt windows, you need to type “ICACLS: \Windows\winsxs” and press the ENTER button.
  3. After that, wait until the command is executed and after that close the Command Prompt
  4. Then, you have to restart the computer and then run the SFC again for checking if the issue has been fixed or not.

Since this solution is so simple to do, you have to try it.

 

Re-installing the system

If the methods or solutions above are failing to work to fix the Windows Resource Protection could not Perform Windows 10 issue problem, you need to re-install the system. We can say that it is the fastest route to fix this problem. Before you do this action, you have to back up the data first. Below are the steps that you need to follow in order to apply this fourth solution:

  1. First of all, you have to go to the Microsoft Media Creation Tool page.
  2. Click the “download tool now” button that is available there
  3. Then, you need to accept the license of the agreement.
  4. Keep the Default which is for upgrading your computer and then click the Next button.
  5. Go ahead and then follow the prompts that are displayed to finish the whole processes.

Maybe, this is the right solution that you can have to fix the problem.

Those are some methods or solutions that we can share to solve the Windows Resource Protection could not Perform Windows 10 issue. Actually, it is a common problem that is usually happened to most of the Windows 10 users and they can find the right solution to fix it. That is why; you have to try at least one of the solutions above to solve the problem so that you can use the Windows 10 comfortably. Have a try!

Can’t Change Resolution Windows 10

Cant Change Resolution Windows 10

Windows 10 is the newest Operation system from Microsoft Windows. In a year, there are at least 2 big updates that are waiting for the Windows 10. That update is usually launched around the March – April, and September – October. Actually, this update will be not only giving the new features but sometimes it will be followed by several issues as well. One of the most common problem or issue that you will have is the screen resolution that is unable to change.

In the Windows 10 operation system, the adjustment processor screen resolution change is a step that is easy to use. You just need to right-click your computer screen and choose the option of “Display Settings”. After that, from the part of “Resolution”, you have to choose the resolution that you want to have. It is so simple, isn’t it?

However, lately, after you upgrade the operating system into the newest Windows 10, many users said that they are no longer able to change the resolution in that Windows 10. They can’t change resolution Windows 10 because in the screen option they just find the default option that cannot be changed at all.

Are you having the same problem? If it is so, you are in the right place because today we will share some solutions that you can do to be able for changing the resolution in your Windows 10 again.

 

SOLUTION 1: Update the Display Driver Software

To do this first solution, you need to go to the Device Manager first. You can go there by right-click the START menu and find the Device Manager option. After that, please ensure that you have installed the Display Adapters. If it has been installed and you still not able to change your screen resolution, it means that your driver or software of the Display Adapters that you are used is the old version and it is not supporting the Windows 10.

What you need to do next is updating it by right-click it and then choose the Update Driver option. Later, you will have two different options of “Search Automatically for updated driver software” or the option of “Browse my Computer for Driver Software”. You just need to choose the first option if you are connected to the internet because later your PC will find the newest driver software version for you.

If this first method is not working for you, you can try the other methods below to find out the best one for you. The other solutions are also so easy to try.

 

SOLUTION 2: Reinstall the Display Driver Software

If the first solution is not effective for you, it is a sign that there is a problem in your installed driver software. It can be because of the compatible version or corrupted when the driver installation process is running. It becomes the most common cause that is happened by several Windows 10 users that make them are unable to change the screen resolution.

If it is so, you have to reinstall the display driver software manually. Please ensure that you had already known about the type and brand of the display driver that is installed on your PC. If you already know about that, you can straightly uninstall and then install the driver again. It is so easy and you can try it to find out whether it is the right program for you or not.

 

SOLUTION 3: Checking the Update in Your Windows 10

It means that you have to ensure that your Windows 10 has the newest update version that is installed. To verify this thing, you can follow the steps below in order to check the new Windows 10 version.

  1. First of all, press the Windows + l button together to open the Windows Settings and then choose the “Update and Security” option.
  2. In the Update and Security Windows, you have to choose the Windows Update and then click the “Check for Update” button.
  3. Next, you have to update if there is the newest Windows version.
  4. Wait until the update process is done and then restart your computer. After that, you have to check again to know that the resolution can be changed or not.

This third solution is quite effective for some users. If you are still not able to change the screen resolution, maybe the last solution below is the right one for you.

 

SOLUTION 4: Update the VGA Drivers

All of us knew that our system is completed by the graphics card that is used to display the great screen graphic. You have to ensure that your VGA has been renewed to the newest version that is available. Here are some steps to know how to renew the Driver Display in Windows 10.

  1. First of all, open the Run dialog box by pressing the Windows and R button together. After that, type “devmgmt.msc” without the question mark and then press the ENTER button for opening the Device Manager
  2. After that, in the main windows of Device Manager, choose your VGA name and then right-click. After that, choose the “Update Driver” option.
  3. In the next windows, choose the option of “search automatically for updated driver software” that is located there.
  4. Now, automatically, Windows will find for the newest version from your VGA.

That is it. However, the solution above is the automatic way. In addition, if the automatic solution above is still not able to fix the Screen Resolution issue, you can install the VGA driver manually. For this case, you have to ensure that you had already owned the newest VGA driver that you can download from the internet.

Those are some solutions that we can share for you who can’t change resolution Windows 10. Unable to change the screen resolution is maybe not a huge problem, but it can be a little bit annoying. That is why; we hope that you will find the right solution from the description above that can make you are able to use the Windows 10 more comfortable.

Disable Fast User Switching in Windows 10

Disable Fast User Switching in Windows 10

Windows 10 has several features that can be used by its users. One of those features is the Fast User Switching. Fast User Switching is actually a beneficial feature that can make you are easier to switch from a Windows account to the other account. This process can be done quickly.  However, this feature is not perfect and it also has some weaknesses and in this article, we will talk more about this feature and how to disable it.

In more detail, the Fast User Switching is a feature that makes a user to login in a Windows account when the other user is logging in as well. It means that you don’t need to sign out from your Windows account to login into the other different account. In other words, we can say that switching from a user account to the other users’ account can be done easily and quickly as well.

The Fast User Switching feature or Fast Startup or the Hybrid Shutdown / Hybrid Boot are a feature that has been launched by Microsoft since the Windows 8 era. This feature lets you have a faster boot system. Why? It is because when you d the shutdown, the system will keep the kernel session and driver that is kept in a file with the name of “hiberfil.sys”. When a PC is turned on again so that the system will load that file and make the booting process is faster than usual.

 

The Weakness of Fast User Switching Feature

Although this feature will make you are easier to switch from a Windows account to the other account, this Fast User Switching in Windows 10 feature also has some weaknesses. It is normal because there is nothing perfect in this world, including for the features that we can find at the present time.

What are those weaknesses? The example is when the other account is opening a lot of applications, especially if that application is run in the background; this thing will drastically decrease your PC resource. In addition, as long as there are more than one accounts that signed in so that you are unable to restart or shut down your computer without losing the session and files that are not saved yet in that other account.

Those reasons maybe become a reason why someone wants to disable the Fast User Switching in Windows 10. If you have the multi-account in your Windows 10 and if you don’t want to have this feature, you can easily disable it from the Local Group, Policy Editor or from the Windows Registry. You need to understand that actually these solutions are not 100% disable the Fast User Switching feature in Windows 10.

These solutions will just hide all displays to access this Fast User Switching feature, whether if it is located in the Sign-Inn screen, start menu or even in the Task Manager. Although the solutions below are not 100% disable the Fast User Switching in Windows 10, we can say that it has the identical effect because when all the user accounts are signed out from Windows, so that the Fast User Switching is unable to access again. It also means that there are not any users that can use this Fast User Switching feature and sign in at the same time again.

In addition to disabling this Fast User Switching in Windows 10, below are some methods that are recommended. Check this out.

 

METHOD 1: Through the Local Group Policy Editor

It is the first method that you can try because it is so easy to do. If you are a Windows 10 user or Enterprise, you can disable the Fast User Switching feature in Windows 10 through the Local Group Policy Editor. To do this first method, just do some simple steps below:

  1. Just type “gpedit.msc” in the Search column in Windows
  2. After that, open and browse to the Computer Configuration and choose the “Administrative Templates”
  3. Next, choose the SYSTEM option and then click the log in button there.
  4. In the right panel part, you must choose the option of “Hide entry points for Fast User Switching” and then double-click it.
  5. The next step is choosing the Enabled option > Apply and then click the OK button

This first method is effective for some Windows 10 users and maybe it is also the right method for you. However, if it is not working, you can try the other solutions that we will share below.

 

Is Windows 10 Slower than Windows 8? What do you think?

 

METHOD 2: Through the Edit Registry

We will inform you essential information that if you are a Windows 10 Home user, you will not find any Local Group Policy Editor on it. That is why; you can disable the Fast User Switching in Windows 10 by using the Edit Registry.

To do so, you just need to type “regedit” in the search Windows column and then open the Registry Editor. After that, you need to browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System. Then, right-click on the Key System part and make a new value by choosing the option of New > DWORD > 32bit and you can give it a name of “HideFastUserSwitching”.

The next step to do is double-click that Hides Fast User Switching that you have already made and then in the Data Value part, you can fill it with ‘1’ and then press the OK button. After that, you can restart your PC, but it is an optional action.

Those are some solutions to disable the Fast User Switching in Windows 10. Usually, after applying or doing the methods below, you will not experience the issue again. Whenever you want to switch from an account, so that user account needs to be signed out first; this action will not make the resource PC is too heavy because of many kinds signed-in different account at the same time.

In addition, you can also activate this feature easily at any time you need it by doing several ways that can be looked at the internet or from the other sources.

Msvcp100.dll is Missing Windows 10

Msvcp100.dll is Missing Windows 10

Windows 10 can have some issues and problems that maybe make it are a little bit uncomfortable to use. One of those problems is the “msvcp100.dll is missing”. If you are having this problem right now, you have to know that you are not alone. Hundred of Windows 10 users out there maybe have it too.

Actually, this problem can happen in a certain condition. For the example is when you just had your laptop upgrade to Windows 10 and then when you tried to start the origin. You may find the command of “DLL was missing”. So, can it just be re-installed? Or did that thing changes something? We will find out more in the description below.

Before talking about the solution, here are some conditions where the msvcp100.dll is the missing problem usually happens:

  1. a) A certain program is being used or installed
  2. b) Windows is first shutting down or starting up
  3. c) When there are a new Windows that is being installed

Although this issue sometimes appears and it is quite annoying; but, there are some solutions that you can do in order to fix the msvcp100.dll is missing Windows 10 problem. Here are the further explanations about the solutions. You don’t need to do all the solutions below, but you just need to find the best one that is working for you. So, check this out.

 

Solution 1: Re-install the Microsoft Visual C++ Redistribution Package of MFC Security Update

We can say that it is one of the solutions that are most recommended and loved by many Windows 10 users. Here are the steps to do this first method:

1)         Press the Windows logo key on your keyboard and then choose the “Control Panel” option

2)         After that, view by Category and then click the option of Uninstall a Program

3)         You need to check and see what the version of Microsoft Visual C++ Redistributable program that you have installed on your device is. For this case, we are having the 2005 and 2012 version. Choose one from that list and then choose the “UNINSTALL” option.

4)         After that, you need to repeat the uninstall process with the other Microsoft C++ Redistributable program.

5)         In a lot of cases, this problem can be fixed really well by installing the Visual c++ redistributable 2015 Redistribution Update 3 that can be downloaded from Microsoft. For your information, it is the latest version of the update so far. You have to note that it is always better to only download the file from Microsoft and not download it from the random websites.

6)         When the download is done, you have to double-click the installation file for installing it on your device or computer.

7)         When the installation is done, you can reboot the computer so that the change can take an effect.

If this first method is not working for you, you can try the other solutions or methods below.

 

Another Problem perhaps you are interested about windows 10 upgrade assistant stuck

 

Solution 2: Copying the File only from the Trusted Computer

The other way to fix the msvcp100.dll is missing Windows 10 problem is by copying the same file from the other trusted computer. Here are the complete steps to do this second method:

1)         You have to find the other computer that has the same operating system like what you have

2)         What we mean here is that the Version (Windows 7/8/10) and the Architectures (64-bit/32-bit) of both system operations must be similar.

3)         On that computer, you need to open the File Explorer (by simply pressing the Windows button on your keyboard and the E button together). Next, you need to go to the C:\Windows\System32 and you can copy the msvcp100.dll there.

4)         After that, paste that copied file to the same location (the “C:\Windows\system32”) on your device or computer. For this action, you may need the storage device such as Flash Drive.

It is done. You can try to launch the program again and find out that the issue has been fixed or not.

 

Solution 3: Running a Virus Scan

You have to know that the Malware and Virus infection can stop the .dll file from its running. To fix it, you have to check and run the full system for your anti-virus program. You can do it by using the Windows Defender, but if it is not working, you have to try the other anti-virus program. Below are the instructions to do this third method:

1)         Re-install the program which shows you this notification. Sometimes, the msvcp100.dll is missing Windows 10 problem can be solved by just re-install it.

2)         You can also try the startup repair with a system program

3)         If those steps are not working, you may need to re-install your Windows 10.

Those are the third method that you can try.

 

Method 4: Update the Device Drivers

We can say that this method 4 always become the prior option when there is something wrong with your computer. You can update the device manually by using the Windows Update, or you can also do it from the trusted website manufacturer. For this case, you will need sometimes and the computer skills as well because there are many things that need to ensure.

However, if you are not familiar with the step above, you can do it easily and automatically by using Driver Easy. This tool can automatically recognize the system that is used and then find the right drivers for it. It means that you can stay away from the risks of downloading the wrong device drivers for your system and many more again. In order to do this fourth method to solve the msvcp100.dll is missing Windows 10 problem, below are some steps that you need to do:

1)         First of all, you have to download and install the Driver Easy from the internet

2)         After that, run that program and you need to click the SCAN NOW button that is available there.

3)         Driver Easy will scan your computer automatically and detect if there are some problems with the drivers.

That’s all and maybe it is the best method to solve the msvcp100.dll is missing Windows 10 problem.